Lingenfelter Viper 540 (1996-2002)
General Information:
Package Price: $--,---
Layout: Front-Engine/RWD
Transmission: 6-Speed Manual
Advertisements
Modifications Over Stock Viper:
- Engine disassemble & inspection
- LPE custom cylinder head porting and polishing
- Three angle valve job, set spring heights and assemble heads
- Porting and polishing of intake manifold
- Bore and hone cylinders with torque plates
- Balanced rotating assembly
- Pin fit pistons and connecting rods
- Debur block and prep for assembly
- Blueprint and assemble engine
- Custom Billet steel crankshaft – 4.250"
- Oliver billet steel connecting rods -6.125"
- LPE custom hydraulic roller camshaft
- Custom 1.8 ratio roller rockers
- Larger stainless steel one piece valves
- Valve springs, titanium retainers, valve locks
- JE Forged pistons & heavy duty piston pins
- HD Rod and main bearings
- Gaskets, spark plugs, oil and fluids
- 70 mm billet throttle bodies
- Properly sized injectors
- Stainless headers
- Cat back exhaust system
- Spark fuel calibration
Dimensions:
Curb Weight: 3400 lbs
Height: 43.95 inches
Width: 75.7 inches
Wheelbase: 96.2 inches
Front/Rear Track: F: 59.6 inches
R: 60.6 inches
Engine:
Type: V10
Displacement: 9127 cc
Bore: -.- inches
Stroke: -.-- inches
Valve train: OHV, 2 Valves/Cylinder
Horsepower: 725 bhp @ 5500 rpm
Torque: 740 lb-ft @ 4800 rpm
Rev Limit: 6000 rpm
Performance:
0-60 mph: 3.3 sec
0-100 mph: 6.6 sec
1/4 mile: 11.0 sec @ 134 mph
Top Speed: 200+ mph
Lateral Acceleration: .95g
Braking 60-0: 120 ft
Slalom Speed: --.- mph
Gas Mileage City/Highway: --/--
You may also be interested in . . .
Lingenfelter Viper 510 (1996-2002)
Modifications Over Stock Viper: Engine disassemble & inspection LPE custom cylinder head porting and polishing Three angle valve job, set...Apex Motorsports Lethal 750 Viper (1996-2002)
Modifications Over Stock Viper:
Custom aircraft billet steel keyed stroker crankshaft
Billet steel connecting rods
Custom forged pistons... TNT Serpent 655 (1996-2002)
Modifications Over Stock Viper: Fully ported and polished cylinder heads with 3 angle competition valve job Oversize Stainless intake and...Hennessey Venom 750R (1996-2002)
Modifications Over Stock Viper:
Package includes:
543 CID Stroker Motor (4.03 x (4.25)
JE Forged Aluminum Pistons
Forged Steel Rods
Billet 4.25... Hennessey SRT-10 Venom 650R (2003-????)
Modifications Over Stock Viper:
Package includes:
522 CID Stroker Motor (4.040 in. bore x 4.075 in. stroke)
JE Forged Pistons (11.0:1... Hennessey Venom 700R (1996-2002)
Modifications Over Stock Viper:
Package includes:
JE Forged Aluminum Pistons
Forged Steel Rods
Custom Machined Factory Crankshaft
Steel Wrist... RSI Viper 700 (1996-2002)
Modifications Over Stock Viper:
RSI 1.75-inch stainless steel headers
3-inch stainless steel exhaust, hi-flow cats, 4-inch tips
RSI 510 stroker...