Axis Twin-Turbo Viper (1996-2002)
General Information:
Package Price: $24,750
Layout: Front-Engine/RWD
Transmission: 6-Speed Manual
Advertisements
Modifications Over Stock Viper:
- Two ITS T03/T04 Dual-Ceramic Ball Bearing Turbos rated @ 550HP each
- (Turbos are cooled by engine coolant – lubricated with engine oil)
- Adjustable from 7-15 PSI - inlet temperature only 50 over ambient
- Two HKS Sequential blow off valves (adjustable rate and tension)
- Two Turbonetics wastegates w/multiple spring sets and boost adjust ports
- Two mid pipe connectors (adapts to factory tubular headers)
- Two custom side sill pipes with resonators and cat delete
- SplitSec FTC-02 (fuel & timing computer w/laptop interface) & Harness’s
- MSD Viper Boost Retard box w/ in car dial (adjust on the fly for bad gas, weather)
- In tank 255lph upgraded feeder pump
- CPR billet 1100 Fuel Pump w/relays and harness
- CPR billet Fuel Filter w/100 micron steel filter
- CPR billet Regulator w/return and 1:1 boost reference
- 10 (ten) CPR 42 pound high rate fuel-injectors
- Two custom billet fuel rails
- Two Roe Racing 02 eliminators (replaces factory 02 sensors in rear bank)
- Custom front mount intercooler w/top balance tank (81” Charge Area)
- Two K&N Conical Air filters with a mod plate for aid in airflow
- Two Custom oil pans for Turbos w/oil plumbing lines and internal baffles
- Two electric oil pumps for Turbos w/lines for oil return and wiring/relay package
- Modified passenger side valve cover for oil return lines
- Fuel tank pickup modifications and return line outlets
- Full braided fuel system lines with A/N fittings throughout
- Complete plumbing for vacuum / boost regulation w/manual boost controller
- Complete stainless steel piping for fresh and pressurized air
- Tomei A/F Ratio gauge (Analog) w/02 sensor
- Autometer boost gauge with column mount
- Autometer fuel pressure gauge with cowling mount
- Flowmaster dual chamber mufflers in factory position
- All other braided lines, couplings, harness & relay sets, etc. included
- FTC Tuning software (R4 controller)
Dimensions:
Curb Weight: ---- lbs
Height: 43.95 inches
Width: 75.7 inches
Wheelbase: 96.2 inches
Front/Rear Track: F: 59.6 inches
R: 60.6 inches
Engine:
Type: Twin-Turbo V10
Displacement: 7990 cc
Bore: 4.0 inches
Stroke: 3.88 inches
Valvetrain: OHV, 2 Valves/Cylinder
Horsepower: 800 bhp @ ---- rpm
Torque: --- lb-ft @ ---- rpm
Rev Limit: 6000 rpm
Performance:
0-60 mph: est 3.0 sec
0-100 mph: est 6.0 sec
1/4 mile: est 10.4 sec @ 134 mph
Top Speed: est 215 mph
Lateral Acceleration: -.--g
Braking 60-0: --- ft
Slalom Speed: --.- mph
Gas Mileage City/Highway: --/--
Topics:
You may also be interested in . . .
Heffner 1000SCi Viper (1996-2002)
Modifications Over Stock Viper:
Modifications:
Polished Vortech J-T trim Supercharger
Complete upgraded fuel lines
Upgraded fuel pump
Billet... Hennessey SRT-10 Venom 800TT (2003-????)
Modifications Over Stock Viper:
Package includes:
JE Forged Pistons (9.0:1 Compression)
JE Pro Steel Wrist Pins
Custom Engine Machining... SVSi Stryker TT Stage I Viper (1996-2002)
Modifications Over Stock Viper:
SVS Custom Stainless Turbo Headers
Induction System:
SVSi 70mm billet throttle bodies
Two high performance,... Hennessey Venom 800TT (1996-2002)
Modifications Over Stock Viper:
Twin Garrett Ball Bearing Turbos (0.63 A/R)
Front Mounted Inter cooler
Polished Stainless Steel Inlet Tubes... SVSi SC Stage I Viper (1996-2002)
Modifications Over Stock Viper: Induction System: Hybrid Centrifugal Supercharger SVSi 68mm billet throttle bodies Intake pressure relief...Hennessey Venom 1000TT (1996-2002)
Modifications Over Stock Viper:
Engine displacement increased to 510 cubic inches (4.03 in. x 4.00 in.)
Forged Aluminum Pistons
Steel Wrist... Doug Levin Stage I Viper (1992-2002)
Modifications Over Stock Viper:
High efficiency Supercharger unit
Keyed crankshaft
SFI approved billet damper
10 rib belt drive system
6061...